top of page
Taramps DS 1200X4 2 Ohm
Taramps DS 1200x4 2 Ohm

The DS 1200×4 is synonymous with multichannel amplifier. It has 4 channels of 300 Watts RMS, with a maximum power of 1200 Watts RMS, at 2 ohm and is compatible with any frequency, that is to say, it is a FULL RANGE amp. Versatility, efficiency and quality in a single product.


Inputs of signals to be amplified. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels. CROSSOVER Set the operating mode of amplifier.


To connect the speakers. POWER The connector terminal (+) must be connected to the battery's positive pole with a 16mm² (minimum) wire gauge. The connector terminal (-) must be properly connect to the battery's negative pole with a same wire gauge.


Operation ClassClass D
Number of Channels04
Maximum Power@ 12,6 VDC - 2 OHMS: 1200W RMS (4 x 300W RMS)
Input Sensitivity250mV
Frequency Response9Hz to 27KHz (-3dB)
Crossover High Pass (HPF)90Hz (-12dB/8th) Fixed
Crossover Low Pass (LPF)90Hz (-12dB/8th) Fixed
Protection SystemOutput overload
Maximum Music Consumption@12,6VDC 67,5A
Maximum Consumption in Sinusoidal Signal135A
Dimensions(H X W X D)7.17" x 2.05" x 11.06"

Taramps DS 1200X4 2 Ohm

bottom of page